TotalBoat TotalProtect Epoxy Barrier Coat System (Gray, Quart)

TotalBoat TotalProtect is a highbuild epoxy primer for use above and below the waterline. It creates a barrier coat to prevent water absorption and migration, the main cause of blistered fiberglass hulls. It is also an excellent primer for all underwater metals. This 2 part primer can be used with all paints. 3 to 1 mix ratio formula is easy to use, dries quickly, and requires no sanding. After mixing thoroughly, allow an induction period of 15 minutes prior to reduction and application. TotalBoat TotalProtect is a very thick coating that typically needs to be thinned to improve flow, for best results. TotalBoat Epoxy Primer Thinner 200 is the required thinner for TotalProtect. Do not use any other thinner to reduce. TotalProtect is very easy to apply by brushing, rolling, or spraying. If rolling, use a 3/16" nap or foam solvent-safe roller cover, for best results.Available in your choice of White or Gray. Compare to Interlux Interprotect, and Pettit Protect marine primers. All TotalBoat products are designed by boaters, for boaters. 100% made in the USA.

• High-build two part epoxy primer and barrier coat for use above and below the waterline
• Excellent for gelcoat blister prevention and repair work on fiberglass boats
• Provides superior protection on all underwater metals
• Easy to mix and apply by roller or spray. No sanding required. Fast drying primer creates a flexible, durable epoxy barrier coat.
• Available in White or Gray in Quart or Gallon sizes. Coverage: 225 sq. ft. per gallon (at 7 mils wet). Thinner: TotalBoat Epoxy Primer Thinner 200.